Homey H400 High-Temp Silicone Sealant is a one part, acetoxy cure, high quality silicone sealant which withstands very high temperatures:up to + 315°C during permanent work and up to +365°C for temporary contact. It has excellent adhesion properties to most building materials including and engine applications: Gasket maker,glass and glazed surfaces,ceramics, enamel impregnated and painted wood.
As Supplied Tested at 23℃ and 50% RH
Homey High-Temp Silicone | Homey H400 |
Specific Gravity Kg/L | 0.99±0.05 |
Flow (sag or slump)/mm | 0 |
Extrusion Rate Ml/minute | 100 |
Skin Time/Minutes | ≥5 |
Tack free Time/Hour | ≤1 |
Curing time (5mm)/Day | 1-2 |
As Cured-after 21 days at 23℃ and 50% RH
Durometer Hardness, Shore A/ Points | 30 |
Movement Capability/ % | ±25 |
Tensile/Modulus at 50% Elongation/ Mpa | 0.27 |
Tensile/Modulus at 100% Elongation/ Mpa | 0.55 |
Ultimate Tensile Strength/ Mpa | 0055 |
Ultimate Elongation at Break/ % | 375 |
Easy to use -one part, no mixing required.
- High temperature resistance
- Cures to a strong, flexible seal capable of withstanding movement in and around the joint.
- Makes gaskets that resist high temperature and most fluids
- Instant gasket cures to a tough silicone
- Forms gasket instantly from the tube, any size, any shape
- Resist to ageing, water, oil, grease and vibration
Standard color:Red,Grey,Black
Special Color: Contact us for special color
Cut seal on top of cartridge. Screw on nozzle and cut the nozzle at 45°angle to the desired shape and size. For better appearance ,cover outside of joint areas with masking tape before application. Tool immediately after sealant application and remove masking tape before sealant skins. Do not simply lay a bead on the surface as the sealant will not penetrate the joint under its own weight.
Clean all grease, dirty, water, klunky sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts. For best results wipe all surfaces with HOMEY cleaner, methylated spirits or acetone, use a lint free cloth, then wipe again with a dry lint free cloth. Detergent or soap water treatments are not recommended.
Incompatibility of glazing materials can lead to sealant discoloration and/or loss of adhesion. To help protect against these problems and to ensure compatibility, HOMEY will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.)and other HOMEY Silicone Sealants.
- Not recommended for use on structural application
- Do not use in the manufacture of Insulated Glass(IG) Units.
- Not recommended for use on materials where the cure by-product (acetic acid vapor) may cause corrosion, discoloration or where the sealant may affect their appearance (e.g. galvanized iron, copper,brass, zinc-coated steel, concrete, cement, brick, limestone, marble and similar highly porous stone finishes).
- Do not use for sub-graded application, confined space or surfaces that require post finishes or paintings.
- Do not clean or treat the sealant with materials, solvents or cleaning agents that may affect or discolor the sealant, particularly during sealant cure.
- Not for permanent or continuous water immersion.
- Not intended for food-contact applications.
- Not recommended for use in closed or confined areas where sealant cure may be inhibited by lack of air.
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.
Standard size: 85g, 50g, 25g,280ml,300ml
Special size: Can contact us for special size.
12 months from manufacture date when store in cool dry locations below 25℃, keep away from heat source and direct sunlight during storage.














