C100 PU Foam Cleaner

  • Description
  • Specifications
  • HOMEY C100 PU Foam Cleaner is special designed for removing the uncured (wet) polyurethane foam from hands, tools and gun application. The adapter may be used as a spray attachment, or the can may be connected to the gun to flush the barrel.

     

    Features

    ·Designed specially for cleaning the foam gun

    ·Cleaner has a spray valve for removing the foam form the gun adapter

    ·It can be used in all position

    ·Propellant gas is not harmful to the ozone layer


    Instruction

    ·Shake the aerosol can for at least 30 seconds.

    ·Spray the PU Foam Gun to clean the extra polyurethane foam attached on the gun.

    ·Fit the gun on the adapter. Firmly screw the can on the adapter and turn the flow adjustment screw.

    ·Gun out the cleaner to clean the gun.

    ·Clean the extra polyurethane foam on skin, tools, floor, clothes and so on.


    Caution

    ·Keep away from heat, sparks, flames and static electricity.

    ·Turn off sources of ignition (pilot light etc.).

    ·Use in well-ventilated areas.

    ·Keep out of the reach of children.

    ·Can is under pressure. Do not burn or pierce, even after use.

    ·In case of eye contact, flush with water and get immediate medical attention

    ·Keep away from direct sunlight and do not expose temperatures over 50℃.

    ·Store in upright position.


    Shelf Life: 12 months when store below 25°C





本网站由阿里云提供云计算及安全服务 Powered by CloudDream